Order it, put it on your Titan, drive with it. If anything goes wrong, we fix it — fast, and on us.
Doesn't fit your Titan? Email us — we make it right free: the correct part or your money back.
If the bar fails within 12 months, we ship you a new one. No need to send the old one back.
Not happy for any reason? Return it within 30 days for a full refund.
Questions before you order? Email truckedge.shop@gmail.com — we answer within a day.
Rain, fog, dusk on the highway — that's when rear-end hits happen. A full-width LED bar at bumper height puts your brake signal exactly where following drivers are already looking. They react sooner. Your Titan stays out of the body shop.
Running light when your headlights are on. Full-brightness red when you hit the brakes. Amber flash when you signal. Bright white when you reverse.
It reads your Titan's existing signals automatically — nothing to press, nothing to remember.
Peel the adhesive backing, press it under your tailgate lip, plug the harness into the flat 4-pin trailer connector you already have. Brake, running and turn are done — nothing gets cut.
The white reverse light takes one extra wire to your reverse lamp with the included quick-connector. Two more minutes.
Sealed LED strip in a weatherproof jacket. Rain, snow, road salt, mud, the pressure washer at the truck stop — built to take it.
The full width of the bar flashes amber on the side you're turning. Following drivers see your intention from three cars back.
Three steps. No drilling. No mechanic.
Wipe the tailgate lip, peel the backing, press the bar on straight.
Run the cable along the frame to your trailer connector. Reverse wire goes to the reverse lamp.
Click into the 4-pin plug. Tap the brakes, hit the blinker — you're done.
| TruckEdge | Cheap strips | |
|---|---|---|
| Sized for the Titan tailgate | ✓ | ✗ one-size-fits-none |
| Sealed against water | ✓ | ✗ fails first winter |
| Automotive-grade adhesive | ✓ | ✗ falls off in heat |
| Plug & play 4-pin harness | ✓ | ✗ cut & splice |
| 12-month warranty + US support | ✓ | ✗ |
This bar is built for the Nissan Titan 2004–2015 only. It mounts under the tailgate lip and plugs into the standard flat 4-pin trailer connector.
Not sure? Email us your truck's year and trim before ordering — we answer within a day.
No — this bar is built for the 2004–2015 Nissan Titan only. The 2016+ Titan and the Titan XD are not compatible.
Not for brake, running or turn — the harness plugs into the flat 4-pin trailer connector behind your bumper. The white reverse light takes one extra wire to your reverse lamp with the included quick-connector; no cutting into factory wiring. Skip it and the bar still runs red and amber normally.
It supplements your factory lights, it doesn't replace them. Red brake / amber turn / white reverse follows standard US lighting colors.
No. Hyperflash happens when you swap factory bulbs for LEDs. This bar adds to your lighting — it doesn't replace any bulb — so your flasher sees the same load it always did.
The bar comes with automotive adhesive tape plus backup mounting clips. If anything fails within 12 months, we replace it.
It ships from our US warehouse with tracking. You'll see the delivery options at checkout.
Free tracked shipping · 12-month warranty · Fit guarantee