✓ In stock — free USA shipping
Silverado / Sierra 1500, 2500 & 3500: 60" fits edge to edge. Want a shorter bar centered under the tailgate? Pick 48".
Step 2 — pick your kit: most owners bundle
Couldn't add to cart. Refresh the page and try again.
🛡 Fit guarantee: wrong size? We swap it free. · 12-month warranty
Rain, fog, dusk on the highway — that's when rear-end hits happen. A full-width LED bar at bumper height puts your brake signal exactly where following drivers are already looking. They react sooner. Your truck stays out of the body shop.
Running light when your headlights are on. Full-brightness red when you hit the brakes. Sequential amber arrows when you signal. Bright white flood when you reverse.
It reads your truck's existing signals automatically — nothing to press, nothing to remember.
Peel the 3M backing, press it under your tailgate lip, plug the harness into the flat 4-pin trailer connector you already have. That's the whole job.
10 minutes in the driveway with zero tools. If you can plug in a trailer, you can install this.
Fully potted circuit in a sealed silicone jacket. Rain, snow, road salt, mud, the pressure washer at the truck stop — none of it gets in.
Rated for -40°F to 176°F. It'll outlast the tires.
Flowing amber arrows sweep in the direction you're turning — same style as new trucks off the lot. Following drivers see your intention from three cars back.
Three steps. No tools. No mechanic.
Wipe the tailgate lip, peel the 3M backing, press the bar on straight.
Run the flat cable along the bed rail to your trailer connector. Clips included.
Click into the 4-pin plug. Tap the brakes, hit the blinker — you're done.
| TruckEdge | Cheap strips | |
|---|---|---|
| Sequential amber turn signal | ✓ | ✗ |
| IP67 sealed against water | ✓ | ✗ fails first winter |
| Genuine 3M automotive tape | ✓ | ✗ falls off in heat |
| Plug & play 4-pin harness | ✓ | ✗ cut & splice |
| 12-month warranty + US support | ✓ | ✗ |
This bar is designed for Chevy Silverado and GMC Sierra trucks only — 1500, 2500 and 3500. It mounts under the tailgate lip and plugs straight into the standard flat 4-pin trailer connector. It does not fit Ford, RAM, Toyota or other brands.
Not sure? Email us your truck's year, model and trim before ordering — we answer within a day. Wrong size? We swap it free.
"Had it on my '19 Silverado 2500 for two months now including a hail storm. Brake light is BRIGHT. Install took me 12 minutes and I'm no mechanic."
"Bought it after almost getting rear-ended pulling my boat at dusk. The sequential turn signal alone is worth it. Guys at the lake keep asking where I got it."
"Put the 60 on my '17 Sierra 1500, lines up perfect edge to edge. Only wish I'd bought one years ago. Wire routing instructions could have bigger print."
No — this bar is built for Chevy Silverado and GMC Sierra only. If you drive another brand, this isn't the right product for your truck.
No. The harness plugs directly into the flat 4-pin trailer connector behind your bumper. If your truck has a 7-pin, the included adapter handles it. Nothing gets cut.
Yes — it supplements your factory lights, it doesn't replace them. Red brake / amber turn / white reverse matches DOT color conventions in all 50 states.
Yes. The harness has a pass-through, so your trailer connector stays free while the bar is hooked up.
It's genuine 3M VHB tape rated for automotive exteriors, plus the bar comes with backup mounting clips. If anything fails in 12 months, we replace it — no shipping the old one back.
We swap it free. Email us, we ship the right size, done.
Free USA shipping · 12-month warranty · Fit guarantee
Order it, put it on your Titan, drive with it. If anything goes wrong, we fix it — fast, and on us.
Doesn't fit your Titan? Email us — we make it right free: the correct part or your money back.
If the bar fails within 12 months, we ship you a new one. No need to send the old one back.
Not happy for any reason? Return it within 30 days for a full refund.
Questions before you order? Email truckedge.shop@gmail.com — we answer within a day.
Rain, fog, dusk on the highway — that's when rear-end hits happen. A full-width LED bar at bumper height puts your brake signal exactly where following drivers are already looking. They react sooner. Your Titan stays out of the body shop.
Running light when your headlights are on. Full-brightness red when you hit the brakes. Amber flash when you signal. Bright white when you reverse.
It reads your Titan's existing signals automatically — nothing to press, nothing to remember.
Peel the adhesive backing, press it under your tailgate lip, plug the harness into the flat 4-pin trailer connector you already have. Brake, running and turn are done — nothing gets cut.
The white reverse light takes one extra wire to your reverse lamp with the included quick-connector. Two more minutes.
Sealed LED strip in a weatherproof jacket. Rain, snow, road salt, mud, the pressure washer at the truck stop — built to take it.
The full width of the bar flashes amber on the side you're turning. Following drivers see your intention from three cars back.
Three steps. No drilling. No mechanic.
Wipe the tailgate lip, peel the backing, press the bar on straight.
Run the cable along the frame to your trailer connector. Reverse wire goes to the reverse lamp.
Click into the 4-pin plug. Tap the brakes, hit the blinker — you're done.
| TruckEdge | Cheap strips | |
|---|---|---|
| Sized for the Titan tailgate | ✓ | ✗ one-size-fits-none |
| Sealed against water | ✓ | ✗ fails first winter |
| Automotive-grade adhesive | ✓ | ✗ falls off in heat |
| Plug & play 4-pin harness | ✓ | ✗ cut & splice |
| 12-month warranty + US support | ✓ | ✗ |
This bar is built for the Nissan Titan 2004–2015 only. It mounts under the tailgate lip and plugs into the standard flat 4-pin trailer connector.
Not sure? Email us your truck's year and trim before ordering — we answer within a day.
No — this bar is built for the 2004–2015 Nissan Titan only. The 2016+ Titan and the Titan XD are not compatible.
Not for brake, running or turn — the harness plugs into the flat 4-pin trailer connector behind your bumper. The white reverse light takes one extra wire to your reverse lamp with the included quick-connector; no cutting into factory wiring. Skip it and the bar still runs red and amber normally.
It supplements your factory lights, it doesn't replace them. Red brake / amber turn / white reverse follows standard US lighting colors.
No. Hyperflash happens when you swap factory bulbs for LEDs. This bar adds to your lighting — it doesn't replace any bulb — so your flasher sees the same load it always did.
The bar comes with automotive adhesive tape plus backup mounting clips. If anything fails within 12 months, we replace it.
It ships from our US warehouse with tracking. You'll see the delivery options at checkout.
Free tracked shipping · 12-month warranty · Fit guarantee